MyHealth@EU Core
1.0.0 - trial-use 150

This page is part of the MyHealth@Eu Core (v1.0.0: Wave 9) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: ConditionMyHealthCore - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the condition-myhealtheu-core resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Condition
Definition

A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

ShortDetailed information about conditions, problems or diagnoses
Control0..*
Is Modifierfalse
Summaryfalse
Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
con-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
2. Condition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Condition.language
Definition

The base language in which the resource is written.

ShortLanguage of the condition contentLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from The codes SHOULD be taken from eHDSI Languagehttp://hl7.org/fhir/ValueSet/languages|4.0.1
(required to http://terminology.ehdsi.eu/ValueSet/eHDSILanguage)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Condition.extension:assertedDate
Slice NameassertedDate
Definition

When the asserter identified the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept that may have risen to a level of or remains a concern. For example, when the patient experiences chest pain, the asserted date represents when the clinician began following the chest pain - not when the patient experienced the chest pain. Asserted date supports the recognition that information is not always entered in a system immediately. Assertion and recording are different acts, so asserted date and recorded date are semantically different. However, they may be the same date and close in time. If this difference is significant for your use case, assertion date may be useful.

ShortDate the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept was first asserted
Comments

The assertedDate is in the context of the recording practitioner and might not be the same as the recordedDate.

Control0..1
TypeExtension(Condition Asserted Date) (Extension Type: dateTime)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Condition.extension:assertedDate.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 10. Condition.extension:assertedDate.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/condition-assertedDate
    12. Condition.extension:assertedDate.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortDate and time of the diagnosis assertionValue of extension
    Control10..1
    This element is affected by the following invariants: ext-1
    TypedateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Condition.extension:relatedArtifact
    Slice NamerelatedArtifact
    Definition

    Related artifacts such as additional documentation, justification, dependencies, bibliographic references, and predecessor and successor artifacts.

    ShortAdditional documentation, citations, etc.
    Comments

    Each related artifact is either an attachment, or a reference to another resource, but not both.

    Control0..*
    TypeExtension(Artifact related artifact) (Extension Type: RelatedArtifact)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Condition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Condition.clinicalStatus
    Definition

    The problem status describes the condition of the problem:

    1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

    2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

    3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.


    The clinical status of the condition.

    Shortactive | recurrence | relapse | inactive | remission | resolved
    Comments

    The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

    Control0..1
    This element is affected by the following invariants: con-3, con-4, con-5
    BindingThe codes SHALL be taken from ConditionClinicalStatusCodeshttp://hl7.org/fhir/ValueSet/condition-clinical|4.0.1
    (required to http://hl7.org/fhir/ValueSet/condition-clinical)
    TypeCodeableConcept
    Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Condition.verificationStatus
    Definition

    The verification status to support the clinical status of the condition.

    Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
    Comments

    verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

    Control0..1
    This element is affected by the following invariants: con-3, con-5
    BindingThe codes SHALL be taken from ConditionVerificationStatushttp://hl7.org/fhir/ValueSet/condition-ver-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
    TypeCodeableConcept
    Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Condition.category
    Definition

    A category assigned to the condition.

    ShortCategoryproblem-list-item | encounter-diagnosis
    Comments

    The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

    Control0..*
    BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodeshttp://hl7.org/fhir/ValueSet/condition-category|4.0.1
    (extensible to http://hl7.org/fhir/ValueSet/condition-category|4.0.1)

    A category assigned to the condition.

    TypeCodeableConcept
    Is Modifierfalse
    Obligations
      ObligationsActor
      SHOULD:handleMyHealth@EU Handler
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Condition.severity
      Definition

      A subjective assessment of the severity of the condition as evaluated by the clinician.

      ShortSubjective severity of condition
      Comments

      Coding of the severity with a terminology is preferred, where possible.

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from eHDSI Severityhttp://hl7.org/fhir/ValueSet/condition-severity|4.0.1
      (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSISeverity)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Condition.code
      Definition

      The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.


      Identification of the condition, problem or diagnosis.

      ShortIdentification of the condition, problem or diagnosis
      Control10..1
      BindingThe codes SHALL be taken from For example codes, see eHDSI Problems and Diagnoses With Exceptionshttp://hl7.org/fhir/ValueSet/condition-code|4.0.1
      (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIProblemWithExceptions)
      TypeCodeableConcept
      Is Modifierfalse
      Obligations
        ObligationsActor
        SHOULD:handleMyHealth@EU Handler
        Summarytrue
        Requirements

        0..1 to account for primarily narrative only resources.

        Alternate Namestype
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Condition.bodySite
        Definition

        The anatomical location where this condition manifests itself.

        ShortAnatomical location, if relevant
        Comments

        Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

        Control0..*
        BindingThe codes SHALL be taken from For example codes, see eHDSI Body Site With Exceptionshttp://hl7.org/fhir/ValueSet/body-site|4.0.1
        (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIBodySiteWithExceptions)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        eu-bodysite-1: Either a body site code or a reference to a BodyStructure resource SHALL be used, but not both. ((coding.empty() and text.empty()) or extension('http://hl7.org/fhir/StructureDefinition/bodySite').empty())
        30. Condition.bodySite.extension:bodySite
        Slice NamebodySite
        Definition

        Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

        ShortTarget anatomic location or structure
        Control0..1
        TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Condition.bodySite.extension:bodySite.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Condition.bodySite.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 34. Condition.bodySite.extension:bodySite.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
          36. Condition.bodySite.extension:bodySite.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          ShortValue of extension
          Control10..1
          This element is affected by the following invariants: ext-1
          TypeReference(BodyStructure (Core)), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Condition.subject
          Definition

          Indicates the patient or group who the condition record is associated with.

          ShortWho has the condition?
          Control1..1
          TypeReference(Patient (Core), Patient, Group)
          Is Modifierfalse
          Summarytrue
          Requirements

          Group is typically used for veterinary or public health use cases.

          Alternate Namespatient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Condition.subject.reference
          Definition

          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

          ShortLiteral reference, Relative, internal or absolute URL
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control10..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Condition.onset[x]
          Definition

          Estimated or actual date or date-time the condition began, in the opinion of the clinician.

          ShortEstimated or actual date, date-time, or age
          Comments

          Age is generally used when the patient reports an age at which the Condition began to occur.

          Control0..1
          TypeChoice of: dateTime, Age, Period, Range, string
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Obligations
            ObligationsActor
            SHOULD:handleMyHealth@EU Handler
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
            • type @ $this
            • 44. Condition.onset[x]:onsetDateTime
              Slice NameonsetDateTime
              Definition

              Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.


              Estimated or actual date or date-time the condition began, in the opinion of the clinician.

              ShortEstimated or actual date, date-time, or age
              Comments

              Age is generally used when the patient reports an age at which the Condition began to occur.

              Control0..1
              TypedateTime, string, Period, Range, Age
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. Condition.abatement[x]
              Definition

              The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

              ShortWhen in resolution/remission
              Comments

              There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

              Control0..1
              This element is affected by the following invariants: con-4
              TypeChoice of: dateTime, Age, Period, Range, string
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Obligations
                ObligationsActor
                SHOULD:handleMyHealth@EU Handler
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                • type @ $this
                • 48. Condition.abatement[x]:abatementDateTime
                  Slice NameabatementDateTime
                  Definition

                  The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted


                  The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                  ShortWhen in resolution/remission
                  Comments

                  There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                  Control0..1
                  This element is affected by the following invariants: con-4
                  TypedateTime, string, Period, Range, Age
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  50. Condition.recorder
                  Definition

                  Individual who recorded the record and takes responsibility for its content.

                  ShortWho recorded the condition
                  Control0..1
                  TypeReference(PractitionerRole (Core), Practitioner (Core), Patient (Core), RelatedPerson, Practitioner, PractitionerRole, Patient, RelatedPerson)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                  Guidance on how to interpret the contents of this table can be foundhere

                  0. Condition
                  2. Condition.language
                  BindingThe codes SHALL be taken from eHDSI Language
                  (required to http://terminology.ehdsi.eu/ValueSet/eHDSILanguage)
                  4. Condition.category
                  Obligations
                    ObligationsActor
                    SHOULD:handleMyHealth@EU Handler
                    6. Condition.severity
                    BindingUnless not suitable, these codes SHALL be taken from eHDSI Severity
                    (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSISeverity)
                    8. Condition.code
                    BindingThe codes SHALL be taken from eHDSI Problems and Diagnoses With Exceptions
                    (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIProblemWithExceptions)
                    Obligations
                      ObligationsActor
                      SHOULD:handleMyHealth@EU Handler
                      10. Condition.bodySite
                      BindingThe codes SHALL be taken from eHDSI Body Site With Exceptions
                      (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIBodySiteWithExceptions)
                      12. Condition.bodySite.extension:bodySite
                      Slice NamebodySite
                      14. Condition.bodySite.extension:bodySite.value[x]
                      TypeReference(BodyStructure (Core))
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      16. Condition.subject
                      TypeReference(Patient (Core))
                      18. Condition.subject.reference
                      Control1..?
                      20. Condition.onset[x]
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Obligations
                        ObligationsActor
                        SHOULD:handleMyHealth@EU Handler
                        22. Condition.abatement[x]
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Obligations
                          ObligationsActor
                          SHOULD:handleMyHealth@EU Handler
                          24. Condition.recorder
                          TypeReference(PractitionerRole (Core), Practitioner (Core), Patient (Core), RelatedPerson)
                          26. Condition.stage
                          28. Condition.stage.summary
                          BindingThe codes SHALL be taken from eHDSI Condition Stage With Exceptions
                          (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIConditionStageWithExceptions)
                          30. Condition.stage.type
                          BindingThe codes SHALL be taken from eHDSI Condition Stage Type With Exceptions
                          (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIConditionStageTypeWithExceptions)

                          Guidance on how to interpret the contents of this table can be foundhere

                          0. Condition
                          Definition

                          A clinical condition, problem, diagnosis, or other event, situation, issue, or clinical concept that has risen to a level of concern.

                          ShortDetailed information about conditions, problems or diagnoses
                          Control0..*
                          Is Modifierfalse
                          Summaryfalse
                          Invariantscon-3: Condition.clinicalStatus SHALL be present if verificationStatus is not entered-in-error and category is problem-list-item (clinicalStatus.exists() or verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code = 'entered-in-error').exists() or category.select($this='problem-list-item').empty())
                          con-4: If condition is abated, then clinicalStatus must be either inactive, resolved, or remission (abatement.empty() or clinicalStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-clinical' and (code='resolved' or code='remission' or code='inactive')).exists())
                          con-5: Condition.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (verificationStatus.coding.where(system='http://terminology.hl7.org/CodeSystem/condition-ver-status' and code='entered-in-error').empty() or clinicalStatus.empty())
                          dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                          dom-6: A resource should have narrative for robust management (text.`div`.exists())
                          2. Condition.id
                          Definition

                          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                          ShortLogical id of this artifact
                          Comments

                          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                          Control0..1
                          Typeid
                          Is Modifierfalse
                          Summarytrue
                          4. Condition.meta
                          Definition

                          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                          ShortMetadata about the resource
                          Control0..1
                          TypeMeta
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          6. Condition.implicitRules
                          Definition

                          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                          ShortA set of rules under which this content was created
                          Comments

                          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                          Control0..1
                          Typeuri
                          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          8. Condition.language
                          Definition

                          The base language in which the resource is written.

                          ShortLanguage of the condition content
                          Comments

                          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                          Control0..1
                          BindingThe codes SHALL be taken from eHDSI Language
                          (required to http://terminology.ehdsi.eu/ValueSet/eHDSILanguage)
                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          10. Condition.text
                          Definition

                          Human readable specification of the problem. This is a general notes/comments entry for description of the problem, its diagnosis and prognosis.

                          ShortText summary of the resource, for human interpretation
                          Comments

                          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                          Control0..1
                          TypeNarrative
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesnarrative, html, xhtml, display
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          12. Condition.contained
                          Definition

                          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                          ShortContained, inline Resources
                          Comments

                          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                          Control0..*
                          TypeResource
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesinline resources, anonymous resources, contained resources
                          14. Condition.extension
                          Definition

                          An Extension

                          ShortExtension
                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Condition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 16. Condition.extension:assertedDate
                            Slice NameassertedDate
                            Definition

                            When the asserter identified the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept that may have risen to a level of or remains a concern. For example, when the patient experiences chest pain, the asserted date represents when the clinician began following the chest pain - not when the patient experienced the chest pain. Asserted date supports the recognition that information is not always entered in a system immediately. Assertion and recording are different acts, so asserted date and recorded date are semantically different. However, they may be the same date and close in time. If this difference is significant for your use case, assertion date may be useful.

                            ShortDate the allergy, intolerance, condition, problem, or diagnosis or other event, situation, issue, or clinical concept was first asserted
                            Comments

                            The assertedDate is in the context of the recording practitioner and might not be the same as the recordedDate.

                            Control0..1
                            TypeExtension(Condition Asserted Date) (Extension Type: dateTime)
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            18. Condition.extension:assertedDate.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            This element is affected by the following invariants: ele-1
                            Typeid
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            20. Condition.extension:assertedDate.extension
                            Definition

                            An Extension

                            ShortExtension
                            Control0..0
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Condition.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 22. Condition.extension:assertedDate.url
                              Definition

                              Source of the definition for the extension code - a logical name or a URL.

                              Shortidentifies the meaning of the extension
                              Comments

                              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              Fixed Valuehttp://hl7.org/fhir/StructureDefinition/condition-assertedDate
                              24. Condition.extension:assertedDate.value[x]
                              Definition

                              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                              ShortDate and time of the diagnosis assertion
                              Control1..1
                              This element is affected by the following invariants: ext-1
                              TypedateTime
                              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              26. Condition.extension:relatedArtifact
                              Slice NamerelatedArtifact
                              Definition

                              Related artifacts such as additional documentation, justification, dependencies, bibliographic references, and predecessor and successor artifacts.

                              ShortAdditional documentation, citations, etc.
                              Comments

                              Each related artifact is either an attachment, or a reference to another resource, but not both.

                              Control0..*
                              TypeExtension(Artifact related artifact) (Extension Type: RelatedArtifact)
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              28. Condition.modifierExtension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                              ShortExtensions that cannot be ignored
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                              Summaryfalse
                              Requirements

                              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              30. Condition.identifier
                              Definition

                              Globally unique identifier of this problem which remain constant as the resource is updated and propagates from server to server.

                              ShortExternal Ids for this condition
                              Comments

                              This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

                              NoteThis is a business identifier, not a resource identifier (see discussion)
                              Control0..*
                              TypeIdentifier
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows identification of the condition as it is known by various participating systems and in a way that remains consistent across servers.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              32. Condition.clinicalStatus
                              Definition

                              The problem status describes the condition of the problem:

                              1. Active problems are problems of which the patient experiences symptoms or for which evidence exists.

                              2. If condition is abated, then clinicalStatus must be either inactive, resolved, or remission.

                              3. Problems with the status 'Inactive' refer to problems that don't affect the patient anymore or that of which there is no evidence of existence anymore.

                              Shortactive | recurrence | relapse | inactive | remission | resolved
                              Comments

                              The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                              Control0..1
                              This element is affected by the following invariants: con-3, con-4, con-5
                              BindingThe codes SHALL be taken from ConditionClinicalStatusCodes
                              (required to http://hl7.org/fhir/ValueSet/condition-clinical)
                              TypeCodeableConcept
                              Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the condition as no longer active.
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              34. Condition.verificationStatus
                              Definition

                              The verification status to support the clinical status of the condition.

                              Shortunconfirmed | provisional | differential | confirmed | refuted | entered-in-error
                              Comments

                              verificationStatus is not required. For example, when a patient has abdominal pain in the ED, there is not likely going to be a verification status. The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

                              Control0..1
                              This element is affected by the following invariants: con-3, con-5
                              BindingThe codes SHALL be taken from ConditionVerificationStatus
                              (required to http://hl7.org/fhir/ValueSet/condition-ver-status)
                              TypeCodeableConcept
                              Is Modifiertrue because This element is labeled as a modifier because the status contains the code refuted and entered-in-error that mark the Condition as not currently valid.
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              36. Condition.category
                              Definition

                              A category assigned to the condition.

                              ShortCategory
                              Comments

                              The categorization is often highly contextual and may appear poorly differentiated or not very useful in other contexts.

                              Control0..*
                              BindingUnless not suitable, these codes SHALL be taken from ConditionCategoryCodes
                              (extensible to http://hl7.org/fhir/ValueSet/condition-category|4.0.1)

                              A category assigned to the condition.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Obligations
                                ObligationsActor
                                SHOULD:handleMyHealth@EU Handler
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                38. Condition.severity
                                Definition

                                A subjective assessment of the severity of the condition as evaluated by the clinician.

                                ShortSubjective severity of condition
                                Comments

                                Coding of the severity with a terminology is preferred, where possible.

                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from eHDSI Severity
                                (extensible to http://terminology.ehdsi.eu/ValueSet/eHDSISeverity)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                40. Condition.code
                                Definition

                                The problem code specifies the problem. Depending on the setting, different code systems can be used. The ProblemCodelist provides an overview of the possible code systems.

                                ShortIdentification of the condition, problem or diagnosis
                                Control1..1
                                BindingThe codes SHALL be taken from eHDSI Problems and Diagnoses With Exceptions
                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIProblemWithExceptions)
                                TypeCodeableConcept
                                Is Modifierfalse
                                Obligations
                                  ObligationsActor
                                  SHOULD:handleMyHealth@EU Handler
                                  Summarytrue
                                  Requirements

                                  0..1 to account for primarily narrative only resources.

                                  Alternate Namestype
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  42. Condition.bodySite
                                  Definition

                                  The anatomical location where this condition manifests itself.

                                  ShortAnatomical location, if relevant
                                  Comments

                                  Only used if not implicit in code found in Condition.code. If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

                                  Control0..*
                                  BindingThe codes SHALL be taken from eHDSI Body Site With Exceptions
                                  (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIBodySiteWithExceptions)
                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  eu-bodysite-1: Either a body site code or a reference to a BodyStructure resource SHALL be used, but not both. ((coding.empty() and text.empty()) or extension('http://hl7.org/fhir/StructureDefinition/bodySite').empty())
                                  44. Condition.bodySite.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  46. Condition.bodySite.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Condition.bodySite.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 48. Condition.bodySite.extension:bodySite
                                    Slice NamebodySite
                                    Definition

                                    Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                                    ShortTarget anatomic location or structure
                                    Control0..1
                                    TypeExtension(BodyStructure Reference) (Extension Type: Reference(BodyStructure))
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    50. Condition.bodySite.extension:bodySite.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    This element is affected by the following invariants: ele-1
                                    Typeid
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    52. Condition.bodySite.extension:bodySite.extension
                                    Definition

                                    An Extension

                                    ShortExtension
                                    Control0..0
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Condition.bodySite.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 54. Condition.bodySite.extension:bodySite.url
                                      Definition

                                      Source of the definition for the extension code - a logical name or a URL.

                                      Shortidentifies the meaning of the extension
                                      Comments

                                      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                                      Control1..1
                                      Typeuri
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/bodySite
                                      56. Condition.bodySite.extension:bodySite.value[x]
                                      Definition

                                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                                      ShortValue of extension
                                      Control1..1
                                      This element is affected by the following invariants: ext-1
                                      TypeReference(BodyStructure (Core))
                                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                      Is Modifierfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      58. Condition.bodySite.coding
                                      Definition

                                      A reference to a code defined by a terminology system.

                                      ShortCode defined by a terminology system
                                      Comments

                                      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                      Control0..*
                                      TypeCoding
                                      Is Modifierfalse
                                      Summarytrue
                                      Requirements

                                      Allows for alternative encodings within a code system, and translations to other code systems.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      60. Condition.bodySite.text
                                      Definition

                                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                      ShortPlain text representation of the concept
                                      Comments

                                      Very often the text is the same as a displayName of one of the codings.

                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      62. Condition.subject
                                      Definition

                                      Indicates the patient or group who the condition record is associated with.

                                      ShortWho has the condition?
                                      Control1..1
                                      TypeReference(Patient (Core))
                                      Is Modifierfalse
                                      Summarytrue
                                      Requirements

                                      Group is typically used for veterinary or public health use cases.

                                      Alternate Namespatient
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      64. Condition.subject.id
                                      Definition

                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                      ShortUnique id for inter-element referencing
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      XML FormatIn the XML format, this property is represented as an attribute.
                                      Summaryfalse
                                      66. Condition.subject.extension
                                      Definition

                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                      ShortAdditional content defined by implementations
                                      Comments

                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                      Control0..*
                                      TypeExtension
                                      Is Modifierfalse
                                      Summaryfalse
                                      Alternate Namesextensions, user content
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                      SlicingThis element introduces a set of slices on Condition.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • value @ url
                                      • 68. Condition.subject.reference
                                        Definition

                                        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                        ShortLiteral reference, Relative, internal or absolute URL
                                        Comments

                                        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                        Control1..1
                                        This element is affected by the following invariants: ref-1
                                        Typestring
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        70. Condition.subject.type
                                        Definition

                                        The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                        The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                        ShortType the reference refers to (e.g. "Patient")
                                        Comments

                                        This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                        Control0..1
                                        BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                        (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                                        Aa resource (or, for logical models, the URI of the logical model).

                                        Typeuri
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        72. Condition.subject.identifier
                                        Definition

                                        An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                        ShortLogical reference, when literal reference is not known
                                        Comments

                                        When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                        When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                        Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                        Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                        NoteThis is a business identifier, not a resource identifier (see discussion)
                                        Control0..1
                                        TypeIdentifier
                                        Is Modifierfalse
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        74. Condition.subject.display
                                        Definition

                                        Plain text narrative that identifies the resource in addition to the resource reference.

                                        ShortText alternative for the resource
                                        Comments

                                        This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                        Control0..1
                                        Typestring
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        76. Condition.encounter
                                        Definition

                                        The Encounter during which this Condition was created or to which the creation of this record is tightly associated.

                                        ShortEncounter created as part of
                                        Comments

                                        This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. This record indicates the encounter this particular record is associated with. In the case of a "new" diagnosis reflecting ongoing/revised information about the condition, this might be distinct from the first encounter in which the underlying condition was first "known".

                                        Control0..1
                                        TypeReference(Encounter)
                                        Is Modifierfalse
                                        Summarytrue
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        78. Condition.onset[x]
                                        Definition

                                        Estimated or actual date or date-time the condition began, in the opinion of the clinician.

                                        ShortEstimated or actual date, date-time, or age
                                        Comments

                                        Age is generally used when the patient reports an age at which the Condition began to occur.

                                        Control0..1
                                        TypeChoice of: dateTime, Age, Period, Range, string
                                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                        Is Modifierfalse
                                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                        Obligations
                                          ObligationsActor
                                          SHOULD:handleMyHealth@EU Handler
                                          Summarytrue
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          SlicingThis element introduces a set of slices on Condition.onset[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                          • type @ $this
                                          • 80. Condition.onset[x]:onsetDateTime
                                            Slice NameonsetDateTime
                                            Definition

                                            Onset of the symptom, complaint, functional limitation, complication or date of diagnosis. A ‘vague’ date, such as only the year or the month and the year, is permitted.

                                            ShortEstimated or actual date, date-time, or age
                                            Comments

                                            Age is generally used when the patient reports an age at which the Condition began to occur.

                                            Control0..1
                                            TypedateTime
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            82. Condition.abatement[x]
                                            Definition

                                            The date or estimated date that the condition resolved or went into remission. This is called "abatement" because of the many overloaded connotations associated with "remission" or "resolution" - Conditions are never really resolved, but they can abate.

                                            ShortWhen in resolution/remission
                                            Comments

                                            There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                            Control0..1
                                            This element is affected by the following invariants: con-4
                                            TypeChoice of: dateTime, Age, Period, Range, string
                                            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Obligations
                                              ObligationsActor
                                              SHOULD:handleMyHealth@EU Handler
                                              Summaryfalse
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              SlicingThis element introduces a set of slices on Condition.abatement[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                                              • type @ $this
                                              • 84. Condition.abatement[x]:abatementDateTime
                                                Slice NameabatementDateTime
                                                Definition

                                                The date or estimated date that the condition resolved or went into remission. A ‘vague’ date, such as only the year or the month and the year, is permitted

                                                ShortWhen in resolution/remission
                                                Comments

                                                There is no explicit distinction between resolution and remission because in many cases the distinction is not clear. Age is generally used when the patient reports an age at which the Condition abated. If there is no abatement element, it is unknown whether the condition has resolved or entered remission; applications and users should generally assume that the condition is still valid. When abatementString exists, it implies the condition is abated.

                                                Control0..1
                                                This element is affected by the following invariants: con-4
                                                TypedateTime
                                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                86. Condition.recordedDate
                                                Definition

                                                The recordedDate represents when this particular Condition record was created in the system, which is often a system-generated date.

                                                ShortDate when the condition record was created
                                                Control0..1
                                                TypedateTime
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                88. Condition.recorder
                                                Definition

                                                Individual who recorded the record and takes responsibility for its content.

                                                ShortWho recorded the condition
                                                Control0..1
                                                TypeReference(PractitionerRole (Core), Practitioner (Core), Patient (Core), RelatedPerson)
                                                Is Modifierfalse
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                90. Condition.asserter
                                                Definition

                                                Individual who is making the condition statement.

                                                ShortWho asserted the condition
                                                Control0..1
                                                TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson)
                                                Is Modifierfalse
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                92. Condition.stage
                                                Definition

                                                Clinical stage or grade of a condition. May include formal severity assessments.

                                                ShortStage/grade
                                                Control0..*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantscon-1: Stage SHALL have summary or assessment (summary.exists() or assessment.exists())
                                                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                94. Condition.stage.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                Summaryfalse
                                                96. Condition.stage.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                98. Condition.stage.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                100. Condition.stage.summary
                                                Definition

                                                A simple summary of the stage such as "Stage 3". The determination of the stage is disease-specific.

                                                ShortMost recent Stage Group
                                                Control0..1
                                                This element is affected by the following invariants: con-1
                                                BindingThe codes SHALL be taken from eHDSI Condition Stage With Exceptions
                                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIConditionStageWithExceptions)
                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                102. Condition.stage.assessment
                                                Definition

                                                Reference to the evidence on which the staging assessment is based.

                                                ShortFormal record of assessment
                                                Control0..*
                                                This element is affected by the following invariants: con-1
                                                TypeReference(ClinicalImpression, DiagnosticReport, Observation)
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                104. Condition.stage.type
                                                Definition

                                                The kind of staging, such as pathological or clinical staging.

                                                ShortStaging system used.
                                                Control0..1
                                                BindingThe codes SHALL be taken from eHDSI Condition Stage Type With Exceptions
                                                (required to http://fhir.ehdsi.eu/core/ValueSet/eHDSIConditionStageTypeWithExceptions)
                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                106. Condition.evidence
                                                Definition

                                                Supporting evidence / manifestations that are the basis of the Condition's verification status, such as evidence that confirmed or refuted the condition.

                                                ShortSupporting evidence
                                                Comments

                                                The evidence may be a simple list of coded symptoms/manifestations, or references to observations or formal assessments, or both.

                                                Control0..*
                                                TypeBackboneElement
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantscon-2: evidence SHALL have code or details (code.exists() or detail.exists())
                                                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                108. Condition.evidence.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                Summaryfalse
                                                110. Condition.evidence.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                112. Condition.evidence.modifierExtension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                ShortExtensions that cannot be ignored even if unrecognized
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                Summarytrue
                                                Requirements

                                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                Alternate Namesextensions, user content, modifiers
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                114. Condition.evidence.code
                                                Definition

                                                A manifestation or symptom that led to the recording of this condition.

                                                ShortManifestation/symptom
                                                Control0..*
                                                This element is affected by the following invariants: con-2
                                                BindingFor example codes, see ManifestationAndSymptomCodes
                                                (example to http://hl7.org/fhir/ValueSet/manifestation-or-symptom|4.0.1)

                                                Codes that describe the manifestation or symptoms of a condition.

                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                116. Condition.evidence.detail
                                                Definition

                                                Links to other relevant information, including pathology reports.

                                                ShortSupporting information found elsewhere
                                                Control0..*
                                                This element is affected by the following invariants: con-2
                                                TypeReference(Resource)
                                                Is Modifierfalse
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                118. Condition.note
                                                Definition

                                                Comment by the one who determined or updated the Problem.

                                                ShortAdditional information about the Condition
                                                Control0..*
                                                TypeAnnotation
                                                Is Modifierfalse
                                                Summaryfalse
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))