MyHealth@Eu Laboratory Report
0.0.1 - qa-preview 150

MyHealth@Eu Laboratory Report - Local Development build (v0.0.1) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: BodyStructureMyHealthEu - Detailed Descriptions

Draft as of 2024-11-21

Definitions for the BodyStructure-lab-myhealtheu resource profile.

Guidance on how to interpret the contents of this table can be found here

0. BodyStructure
2. BodyStructure.extension:laterality
Slice Namelaterality
Obligations
    ObligationsActor
    SHALL:handle
    4. BodyStructure.extension:laterality.value[x]
    BindingThe codes SHALL be taken from eHDSI Body Site Laterality
    (required to http://terminology.ehdsi.eu/ValueSet/eHDSIBodySiteLaterality)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    6. BodyStructure.morphology
    BindingThe codes SHALL be taken from eHDSI Morphologic Abnormality with exceptions
    (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIMorphologicAbnormalityWithExceptions)
    Obligations
      ObligationsActor
      SHALL:handle
      8. BodyStructure.location
      BindingThe codes SHALL be taken from eHDSI Body Site with exceptions
      (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIBodySiteWithExceptions)
      Obligations
        ObligationsActor
        SHALL:handle
        10. BodyStructure.locationQualifier
        BindingThe codes SHALL be taken from eHDSI Body Structure Location Qualifier with exceptions
        (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIBodyStructureLocationWithExceptions)
        Obligations
          ObligationsActor
          SHALL:handle

          Guidance on how to interpret the contents of this table can be found here

          0. BodyStructure
          Definition

          Record details about an anatomical structure. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

          ShortSpecific and identified anatomical structure
          Control0..*
          Is Modifierfalse
          Summaryfalse
          Alternate Namesanatomical location
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. BodyStructure.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          4. BodyStructure.extension:laterality
          Slice Namelaterality
          Definition

          An Extension

          ShortExtension
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(Extension Definition for BodyStructure.includedStructure.laterality for Version 5.0) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Obligations
            ObligationsActor
            SHALL:handle
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            6. BodyStructure.extension:laterality.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..0*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on BodyStructure.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 8. BodyStructure.extension:laterality.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-BodyStructure.includedStructure.laterality
              10. BodyStructure.extension:laterality.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control10..1
              BindingThe codes SHALL be taken from For codes, see eHDSI Body Site Laterality
              (required to http://terminology.ehdsi.eu/ValueSet/eHDSIBodySiteLaterality)
              TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. BodyStructure.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              14. BodyStructure.active
              Definition

              Whether this body site is in active use.

              ShortWhether this record is in active use
              Comments

              This element is labeled as a modifier because it may be used to mark that the resource was created in error.

              Control0..1
              Typeboolean
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Need to be able to mark a body site entry as not to be used because it was created in error.

              Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              16. BodyStructure.morphology
              Definition

              The kind of structure being represented by the body structure at BodyStructure.location. This can define both normal and abnormal morphologies.

              ShortKind of Structure
              Comments

              The minimum cardinality of 0 supports the use case of specifying a location without defining a morphology.

              Control0..1
              BindingThe codes SHALL be taken from For example codes, see eHDSI Morphologic Abnormality with exceptionshttp://hl7.org/fhir/ValueSet/bodystructure-code
              (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIMorphologicAbnormalityWithExceptions)
              TypeCodeableConcept
              Is Modifierfalse
              Obligations
                ObligationsActor
                SHALL:handle
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                18. BodyStructure.location
                Definition

                The anatomical location or region of the specimen, lesion, or body structure.

                ShortBody site
                Control0..1
                BindingThe codes SHALL be taken from For example codes, see eHDSI Body Site with exceptionshttp://hl7.org/fhir/ValueSet/body-site
                (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIBodySiteWithExceptions)
                TypeCodeableConcept
                Is Modifierfalse
                Obligations
                  ObligationsActor
                  SHALL:handle
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  20. BodyStructure.locationQualifier
                  Definition

                  Qualifier to refine the anatomical location. These include qualifiers for laterality, relative location, directionality, number, and plane.

                  ShortBody site modifier
                  Control0..*
                  BindingThe codes SHALL be taken from For example codes, see eHDSI Body Structure Location Qualifier with exceptionshttp://hl7.org/fhir/ValueSet/bodystructure-relative-location
                  (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIBodyStructureLocationWithExceptions)
                  TypeCodeableConcept
                  Is Modifierfalse
                  Obligations
                    ObligationsActor
                    SHALL:handle
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    22. BodyStructure.image
                    Definition

                    Image or images used to identify a location.

                    ShortAttached images
                    Control0..0*
                    TypeAttachment
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    24. BodyStructure.patient
                    Definition

                    The person to which the body site belongs.

                    ShortWho this is about
                    Control1..1
                    TypeReference(Patient)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                    Guidance on how to interpret the contents of this table can be found here

                    0. BodyStructure
                    Definition

                    Record details about an anatomical structure. This resource may be used when a coded concept does not provide the necessary detail needed for the use case.

                    ShortSpecific and identified anatomical structure
                    Control0..*
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesanatomical location
                    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
                    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
                    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
                    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
                    dom-6: A resource should have narrative for robust management (text.`div`.exists())
                    2. BodyStructure.id
                    Definition

                    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

                    ShortLogical id of this artifact
                    Comments

                    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

                    Control0..1
                    Typeid
                    Is Modifierfalse
                    Summarytrue
                    4. BodyStructure.meta
                    Definition

                    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

                    ShortMetadata about the resource
                    Control0..1
                    TypeMeta
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    6. BodyStructure.implicitRules
                    Definition

                    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                    ShortA set of rules under which this content was created
                    Comments

                    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                    Control0..1
                    Typeuri
                    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    8. BodyStructure.language
                    Definition

                    The base language in which the resource is written.

                    ShortLanguage of the resource content
                    Comments

                    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                    Control0..1
                    BindingThe codes SHOULD be taken from CommonLanguages
                    (preferred to http://hl7.org/fhir/ValueSet/languages)

                    A human language.

                    Additional BindingsPurpose
                    AllLanguagesMax Binding
                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    10. BodyStructure.text
                    Definition

                    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                    ShortText summary of the resource, for human interpretation
                    Comments

                    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                    Control0..1
                    TypeNarrative
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesnarrative, html, xhtml, display
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    12. BodyStructure.contained
                    Definition

                    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                    ShortContained, inline Resources
                    Comments

                    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                    Control0..*
                    TypeResource
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesinline resources, anonymous resources, contained resources
                    14. BodyStructure.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on BodyStructure.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 16. BodyStructure.extension:laterality
                      Slice Namelaterality
                      Definition

                      An Extension

                      ShortExtension
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(Extension Definition for BodyStructure.includedStructure.laterality for Version 5.0) (Extension Type: CodeableConcept)
                      Is Modifierfalse
                      Obligations
                        ObligationsActor
                        SHALL:handle
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        18. BodyStructure.extension:laterality.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        20. BodyStructure.extension:laterality.extension
                        Definition

                        An Extension

                        ShortExtension
                        Control0..0
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on BodyStructure.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 22. BodyStructure.extension:laterality.url
                          Definition

                          Source of the definition for the extension code - a logical name or a URL.

                          Shortidentifies the meaning of the extension
                          Comments

                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-BodyStructure.includedStructure.laterality
                          24. BodyStructure.extension:laterality.value[x]
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          ShortValue of extension
                          Control1..1
                          BindingThe codes SHALL be taken from eHDSI Body Site Laterality
                          (required to http://terminology.ehdsi.eu/ValueSet/eHDSIBodySiteLaterality)
                          TypeCodeableConcept
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          26. BodyStructure.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                          Summaryfalse
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          28. BodyStructure.identifier
                          Definition

                          Identifier for this instance of the anatomical structure.

                          ShortBodystructure identifier
                          NoteThis is a business identifier, not a resource identifier (see discussion)
                          Control0..*
                          TypeIdentifier
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          30. BodyStructure.active
                          Definition

                          Whether this body site is in active use.

                          ShortWhether this record is in active use
                          Comments

                          This element is labeled as a modifier because it may be used to mark that the resource was created in error.

                          Control0..1
                          Typeboolean
                          Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Need to be able to mark a body site entry as not to be used because it was created in error.

                          Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          32. BodyStructure.morphology
                          Definition

                          The kind of structure being represented by the body structure at BodyStructure.location. This can define both normal and abnormal morphologies.

                          ShortKind of Structure
                          Comments

                          The minimum cardinality of 0 supports the use case of specifying a location without defining a morphology.

                          Control0..1
                          BindingThe codes SHALL be taken from eHDSI Morphologic Abnormality with exceptions
                          (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIMorphologicAbnormalityWithExceptions)
                          TypeCodeableConcept
                          Is Modifierfalse
                          Obligations
                            ObligationsActor
                            SHALL:handle
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            34. BodyStructure.location
                            Definition

                            The anatomical location or region of the specimen, lesion, or body structure.

                            ShortBody site
                            Control0..1
                            BindingThe codes SHALL be taken from eHDSI Body Site with exceptions
                            (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIBodySiteWithExceptions)
                            TypeCodeableConcept
                            Is Modifierfalse
                            Obligations
                              ObligationsActor
                              SHALL:handle
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              36. BodyStructure.locationQualifier
                              Definition

                              Qualifier to refine the anatomical location. These include qualifiers for laterality, relative location, directionality, number, and plane.

                              ShortBody site modifier
                              Control0..*
                              BindingThe codes SHALL be taken from eHDSI Body Structure Location Qualifier with exceptions
                              (required to http://fhir.ehdsi.eu/laboratory/ValueSet/eHDSIBodyStructureLocationWithExceptions)
                              TypeCodeableConcept
                              Is Modifierfalse
                              Obligations
                                ObligationsActor
                                SHALL:handle
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                38. BodyStructure.description
                                Definition

                                A summary, characterization or explanation of the body structure.

                                ShortText description
                                Comments

                                This description could include any visual markings used to orientate the viewer e.g. external reference points, special sutures, ink markings.

                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                40. BodyStructure.image
                                Definition

                                Image or images used to identify a location.

                                ShortAttached images
                                Control0..0
                                TypeAttachment
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                42. BodyStructure.patient
                                Definition

                                The person to which the body site belongs.

                                ShortWho this is about
                                Control1..1
                                TypeReference(Patient)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))